OT-MWS150ND02 MINI USB Wireless Adapter Dongle (without antenna)

OT-MWS150ND02 MINI USB Wireless Adapter Dongle (without antenna)

1,IEEE 802.11n,IEEE 802.11g(darft),IEEE 802.11b
2,USB Bus Interface
3,Launch 150/54/48/36/24/18/12/9/6/11/5.5/2/1Mbps
4, Support Windows 98/ME/2000/XP/VISTA/Windows 7


The Wireless N USB Network Adapter now leveraging the power of USB 2.0 and the new faster and more powerful wireless N protocol, you can connect at the highest speed your network supports (more than 150 Mbps). Attractively styled and designed for easy portability, the Adapter plugs into an external USB port on your desktop or notebook (a PC running Windows XP or Vista). Since all of the drivers sit directly on the adapter, it is the first 802.11n USB Adapter that is simple to install. Plus it includes a wireless security (WPS) button that you can push to enable the most advanced wireless security.



1.Standard: IEEE 802.11n,IEEE 802.11g(darft),IEEE 802.11b
2.Effective working distance: 200 meters farthest indoor and 830 meters farthest outdoor(varies due to the environment)
3.Frequency range :2.4-2 .4835 GHz
4.Number of channels: 13
5.Support the network protocol: CSMA / CA with ACK
6.Transfer method: Direct Sequence Spread Spectrum (DSSS)
7.Sensitivity: 54:-68dBm @ 10% PER, 11M:-85dBm @ 8% PER, 6M:-88dBm @ 10% PER, 1M:-90dBm @ 8% PER, 256K:-105dBm @ 8% PER (typical value)
8.: 5dBi antenna
9.Modulation: BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/64-QAM)
10.Bus Interface: USB
11.Security features: Support 64/128/152 bit WEP data encryption, support for WPA, IEEE 802.1X, TKIP, AES encryption and security mechanisms, etc.
12.Status Indicator: Status 
13.Support System: Windows 98/ME/2000/XP/VISTA/Windows 7
14.Other technical parameters: the provision of two working modes: centralized control type (Infrastructure) and Peer-to-Peer (Ad-Hoc)
15.Characteristics: launch 150/54/48/36/24/18/12/9/6/11/5.5/2/1Mbps


How to Enable a USB WiFi Adapter

1, Power on the computer and plug in the USB WiFi adapter into an available USB port.

2, Insert the driver installation disk into the CD driver. In a moment the driver installation wizard will launch. Without these drivers the adapter will not function properly.

3, Accept the license agreement and follow the remaining prompts to complete the driver installation. Once the installation has completed you will see a new icon in the lower right corner of your start  up screen. It will be the image of a single computer monitor

4, Double click the monitor icon to bring up the list of possible wireless connections available.

5, Select the wireless connection you wish to connect to. If a password is required you will be asked to type it here. In a moment the USB WiFi adapter will connect your computer to the Internet.